 |
|
Features
- Ultimate Over-clocking Design Structure, support up to 250W.
- The Combination of VR and PWM Control Function Fan.
- Universal Socket Compatibility.
Detailed Feature Ultimate Over-clocking Design Structure, support up to 250W
- Dual tower heat-sink with 0.4mm aluminum fins provide large surface for heat dissipation.
- 6 x Ø6 mm-U-shape copper heat pipes accelerate heat conductivity.
- Mirror-finished copper base, provide perfect contact with CPU.
- Premium thermal grease maximizes heat transfer from the CPU onto the copper base for faster dissipation.
- Dual 14cm high performance blue blade designed fans, spins from 1,200 to 1,800RPM.
- Combination of VR and PWM functions, switchable upon user’s preferences.
- Tool-less and Easy installation design for quicker disassemble and assemble the fan module.
- All-in-one back-plate design, support all Intel and AMD platform
- Universal socket support :
Intel: LGA 2011, 1366, 1155, 1156, 775
AMD: FM1, AM3+, AM3, AM2+, AM2
Dimension
Intel Motherboard Installation
| Step 1 | Step 2 |
 |  |
| Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers evenly. | Put the two Intel mounting bars along with the four long screws and secure them with the four nuts. |
| Step 3 | Step 4 |
 |  |
| For LGA2011: Screwing the LGA 2011 screw onto motherboard tightly and put the two Intel mounting bars on the LGA 2011 screws. Fasten the four nuts onto the mounting bars tightly. | Install the fan clips onto the heat-sink separately |
| Step 5 | Step 6 |
 |  |
| Applying a thin layer of thermal grease onto the CPU. | Screw the heat-sink onto the motherboard with the mounting plate tightly. |
| Step 7 | Step 8 |
 |  |
| Fix the two fans onto the heat-sink with fan clips separately. | Connect two fan cords to the controller close to the VR Knob. Link the power cord to the CPU FAN slot and the right slot of the controller. |
| Step 9 | |
 | |
| Connect the 4-pin wire of controller to the motherboard’s CPU fan connector. Installation is done. |
AMD Motherboard Installation
| Step 1 | Step 2 |
 |  |
| Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers evenly. | Put the two AMD mounting bars along with the four long screws and secure them with the four nuts. |
| Step 3 | Step 4 |
 |  |
| Install the fan clips onto the heat-sink separately. | Applying a thin layer of thermal grease onto the CPU. |
| Step 5 | Step 6 |
 |  |
| Screw the heat-sink onto the motherboard with the mounting plate tightly. | Fix the two fans onto the heat-sink with fan clips separately. |
| Step 7 | Step 8 |
 |  |
| Connect two fan cords to the controller close to the VR Knob. Link the power cord to the CPU FAN slot and the right slot of the controller. |
